Why a single ECG channel is noisy on Innomed Medical Equipment?
If a single ECG channel is noisy on your Innomed Medical Equipment, the leads of the patient cable may be broken or not placed correctly. Try replacing the patient cable.
Why several ECG channels are noisy on Innomed Medical Equipment?
If several ECG channels are noisy on your Innomed Medical Equipment, check the patient cable and electrode placement, as some leads may be broken or not placed well. If the environment is too noisy, switch the device to battery mode and check for electromagnetic noise. Also, verify the continuity of the mains ground protection conductor to the device charging adapter input point and check/repair the ECG amplifier on the Main Board, as the mains ground protection conductor may be damaged or the amplifier may be generating noise.
What to do if mains filter has no effect on Innomed Medical Equipment?
If the mains filter (50 or 60Hz) has no effect on your Innomed Medical Equipment, check the mains frequency setting and the environment for electromagnetic noise, as the noise may not be appropriate for the mains frequency or the environment noise may be too great.
Why baseline movement is too great on Innomed Medical Equipment?
If the baseline movement is too great on your Innomed Medical Equipment, check if it was caused by condensing humidity and dry the device if necessary.
Why printed curve is missing along a horizontal line on Innomed Medical Equipment?
If the printed curve is missing along a horizontal line on your Innomed Medical Equipment, clean the printer burning head with alcohol. If this does not solve the problem, replace the printer mechanism, as the printer head may be dirty or a pixel may have burnt out on the burning head.
General| Brand | Innomed Medical |
|---|---|
| Model | Hear Screen 112C-1 |
| Category | Medical Equipment |
| Language | English |
Describes reference temperature, operating temperature, humidity, and environment.
Details standard and Cabrera lead group configurations for ECG measurements.
Specifies the measurement range and accuracy for heart frequency.
Details input signal range, frequency response, sensitivity, CMRR, and filters.
Describes printing speed, paper width, resolution, and printed data content.
Details display type, viewing resolution, and number of displayed curves.
Covers communication type (USB, Wi-Fi) and services.
Provides device size and weight information.
Explains how the device detects and handles pacemaker signals.
Illustrates the overall configuration of the HeartScreen112C-1 device components.
Diagram showing the main board with analog and digital parts labeled.
Block diagram illustrating the analog part of the main board.
Diagram showing the interface board components and connections.
Information on the battery pack composition, thermistor, and thermal protection.
Summarized exploded diagrams of the device for mechanical assembly.
Detailed exploded diagram of the device's base components.
Detailed exploded diagram of the device's top components.
Procedures for checking voltages on the main board's digital and analog parts.
Procedures for checking voltages on the interface board.
Tests for patient cable surveillance, power cord, and battery charging.
Measures leakage current during operation and in error conditions.
Examines sensitivity and DC tolerance of the ECG amplifier.
Tests the latch-up watch circuit's operation with DC input.
Measures input noise and baseline deviation on the null-line.
Checks the ECG amplifier's frequency response to AC signals.
Tests the 'Line' filter (50/60Hz) and 'Noise' filter functionality.
Checks the Common Mode Rejection Ratio (CMRR) of the ECG amplifier.
Verifies the quality and continuity of printed ECG signals.
Step-by-step instructions for disassembling and reassembling the device.
Procedure for reprogramming the device software using a PC and USB cable.
Troubleshooting steps when no appropriate voltage is measured at the power supply output.
Troubleshooting steps when the CHARGE LED does not illuminate.
Troubleshooting for the device shutting down right after power on.
Troubleshooting when the software fails to load after device power on.
Troubleshooting for screen display failures while the printer functions.
Troubleshooting steps when the device fails to power on using battery.
Troubleshooting steps when the device fails to power on from mains.
Troubleshooting for non-responsive keys or touch screen failures.
Troubleshooting when the device cannot be successfully reprogrammed.
Troubleshooting for persistent memory errors upon device startup.
Troubleshooting steps for failed PC connection or data transfer.
Troubleshooting for noise or interference on a single ECG channel.
Troubleshooting for noise or interference across multiple ECG channels.
Troubleshooting when the mains filter does not reduce noise.
Troubleshooting for excessive baseline drift or movement in ECG signals.
Troubleshooting for missing horizontal lines on the printer output.
Troubleshooting when the printer does not produce output with paper loaded.
Troubleshooting for faded or incomplete sections on printed output.
Diagram showing the top side components of the Main Board.
Diagram showing the bottom side components of the Main Board.
Diagram showing the top side components of the Interface Board.
Diagram showing the bottom side components of the Interface Board.
Schematic diagrams for the HeartScreen112C-1 Main Board.
Schematic diagrams for the HeartScreen112C-1 Interface Board.
Schematic and connection details for the HeartScreen112C-1 battery package.
To Next Page
