6
Long press “Back/Power ” button 3 second to open or turn o
the Thermal Image device.
This device is powered by 3pcs “AAA” batteries, when the battery
is full, the battery status icon in the upper right corner of the display
shows full white full size “ ”.
As the battery charge decreases, the white portion of the battery
icon also drops.
When the battery symbol is displayed in red, the battery level is
low, you should replace the new one immediately.
If the battery with insucient battery is not replaced in time, the
measured temperature reading may be inaccurate.
APO-Automatic Shutdown: The Thermal Image device will
automatically shut down after a period of inactivity, and the meter
default APO time is 10 minutes.
POWER SUPPLY
To Next Page