Housing
Size: 210 x 184 x 32 mm
1 HE for 19” systems
Weight: 1050 g
Interfaces
4 x ISDN BRI: TE and NT mode to insert in
trunk lines,
inline powered, „Power-off-
loop“ interconnect two BRI interface in
power off status
1 x ISDN BRI interface in TE mode only
2 x Ethernet: RJ 45 interface 10/100-BASE-TX
(auto negotiation), Power over Ethernet
(802.3af, Class 3)
Slot for Compact Flash Cards Type I
Hardware
Power supply:
Power over Ethernet (802.3af, Class 3)
or
internal mains adapter
primary: 100-240 V, 50 Hz, 200 mA
secondary: 40 V DC, 12 W
Power consumption: see wiki-article
„HowTo:Power Consumption“
Digital Signal Processor (DSP)
for codecs up to 10 voice channels
32 MB SDRAM, 8 MB Flash
Operation temperature: 0 °C to +45 °C,
Humidity: 10% to 90%
(not condensed)
Storage temperature: -10 °C to +70 °C
innovaphone PBX
Platform for up to 200 registrations
VoIP protocols
H.323 version 5
SIP version 2, conform RFC 3261
SIP over UDP, TCP, TLS, SIPS
RTP, SRTP, RTCP
T.38 (Fax)
Voice Codecs
G.711 A-law / µ-law,
G.729AB,
VAD, CNG,
Dynamic Jitter Buffering
Echo Compensation: G.168
Network
• PPPoE, manual or automatic connection
after boot
• PPTP Tunneling up to 32 tunnels
simultaneously, encoding via MPPE
• NAT, H.323-NAT
• RSTP, IEEE 802.1x
• VLAN-ID (DHCP and LLDP/MED support)
• NTP support
ISDN
• Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP
• Automatic dial tone European and US
Standard
• ENUM for H.323 and SIP protocols
• Protokolle EDSS1, QSIG
• Plays recorded messages deposed on CF
card or on a web server
Administration
Password protected administration via web-
browser, Kerberos server
Log and trace files, Display of interface and
connection status, Ping – connection test for
Internet Protocol, Sending SNMP Traps
Save and reload config files, Boot code and
firmware update via HTML upload, Automatic
update via update server
Need help?
General
Weight and Dimensions
