Innovative Technology ITVS-200 - How to Open;Close the Turntable Cover; Parts of the Turntable

5
HOW TO OPEN/CLOSE THE TURNTABLE COVER
To Open:
1. Lift the turntable cover all
the way up until it stops.
2. Lower the cover slowly until
the latch engages. If the latch
does not engage, pull the
lower bar by hand.
3. The cover will now stay open.
To Close:
1. Lift the cover all the way up until it stops.
2. The latch should disengage and you may now
slowly lower the cover. If the latch does not
disengage, push out the lower bar by hand.
3. Make sure you hold the cover to avoid pinching
your fingers as it closes.
PARTS OF THE TURNTABLE
TURNTABLE
TRANSPORTATION SCREW
Before use, completely loosen the screw by turning it clockwise
with a coin or screwdriver. When you transport the unit, turn the
screw counter clockwise to secure the turntable.
CUE-LEVER
Use this lever to lift the tone arm.
TONE ARM HOLDER
SPEED SELECTOR
TONE ARM
45 RPM ADAPTOR AND HOLDER
A
B
C
E
D
F
G
Before use, detach stylus
guard (white plastic cover)
by pulling it straight
off the front of
the cartridge
in the direction
of the
arrow.
A
B
C
D
E
F
G