EasyManuals Logo

Inogen One G3 Getting Started

Inogen One G3
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Now that you have unpacked each box, you have everything you need to start
using your Inogen One G3 (IO-300). The set-up of your Inogen One G3 is quick
and simple. However, before using the Inogen One G3, please read the entire
User Manual.
PMS 661 main color/651 swish
www.inogen.com
Place your Inogen One G3 in a well
ventilated location. Ensure both particle
lters are in place.
Insert the Inogen One® G3 battery
by sliding battery into place
until the latch returns to the
upper position.
Connect the AC Power Supply
cord to the Inogen One G3.
Plug the Power Supply
AC cord into the
nearest electrical
outlet.
Connect the nasal cannula
tubing into the metal
nozzle on your Inogen
One G3. Oxygen will only
be delivered while you are
breathing through the nasal
cannula connected to the
device.
Turn on the Inogen One G3 by
pressing the button.
Set the ow setting to the ow rate prescribed
by your clinical professional. The ow setting
can be changed by pressing the triangular ow
setting buttons that are marked with “+” and
“-” symbols. Position the nasal cannula on your
NOTE: You must operate the Inogen One G3 on AC Power for approximately 3 hours to fully charge the battery.
1
2
3
4
5
6
7
Getting Started
After you are familiar with operating
your Inogen One G3 at home, you are
ready to take your Inogen One G3
on the road.
As always, be a careful driver.
DO NOT RUSH OR HURRY to set up
your Inogen One G3 in the car.
Take your time and follow the steps
outlined to the right. The Inogen
One G3 can operate either by battery
or the DC Power Cord while in your
car, boat, or RV.
96-06661-00-01A
326 Bollay Drive,
Goleta, CA 93117
1-877-4-INOGEN (Toll Free)
www.inogen.com
PMS 661 main color/651 swish
7 Simple Steps to Independence.
Car/Boat/RV Usage
CAUTION
Your Equipment Provider:
Your Physician:
PMS 661 main color/651 swish
Plug the DC Power
cord into the
cigarette lighter or
auxillary DC power
supply.
Plug the power output cord
into your Inogen One G3 and
position your Inogen One G3
securely inside the car.
Operate your Inogen One G3
as normally.
Make sure your Inogen One G3
is secure before driving.
PMS 661 main color/651 swish
PMS 661 main color/651 swish

Other manuals for Inogen One G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Inogen One G3 and is the answer not in the manual?

Inogen One G3 Specifications

General IconGeneral
BrandInogen
ModelOne G3
CategoryMedical Equipment
LanguageEnglish

Related product manuals