Inogen Rove 6 - User Manual

Questions and Answers

B
Brian RamirezJul 29, 2025
What to do if Inogen Medical Equipment concentrator does not power on?
- M
  Mark MendozaJul 29, 2025
  If your Inogen Medical Equipment concentrator doesn't power on, it might be due to several reasons. First, ensure the battery isn't discharged or missing; try using an external power supply or a fully charged battery. Next, verify that the AC power supply is properly connected and showing a solid green light. Also, check the DC power cord connection at both the device and the cigarette lighter or auxiliary DC power cord. If none of these steps work, it may indicate a malfunction, and you should contact your equipment provider.
K
Kaitlyn GrantAug 6, 2025
Why is there no oxygen coming from my Inogen Medical Equipment?
- J
  Jeremy AvilaAug 6, 2025
  If you're not getting oxygen from your Inogen Medical Equipment concentrator, first ensure the concentrator is powered on by pressing the On/Off button. Then, check the cannula to make sure it's properly connected to the concentrator nozzle and that it's not kinked or obstructed.
J
Joseph JoyceAug 14, 2025
What to do if Inogen Rove 6 Medical Equipment does not power on?
- M
  Michael CopelandAug 14, 2025
  If your Inogen Medical Equipment concentrator doesn't power on when you press the On/Off button, here are a few things to check: 1. Ensure the battery isn't discharged or missing. If so, use an external power supply or replace it with a fully charged battery. 2. Verify the AC power supply is properly connected and the green light is solid. 3. Check the DC power cable connection both at the device and the DC auxiliary outlet. If none of these steps work, there may be a malfunction and you should contact your equipment provider.
K
Kimberly CrossAug 21, 2025
Why Inogen Rove 6 Medical Equipment has no oxygen?
- G
  guzmanspencerAug 22, 2025
  If your Inogen Medical Equipment isn't providing oxygen, it could be due to a couple of reasons: * The concentrator might not be powered on. Press the On/Off button to turn it on. * The cannula might not be connected correctly, or it could be kinked or blocked. Check the cannula and its connection to the concentrator nozzle to ensure it's clear.

Summary

Intended Use and Safety

Intended Use

Specifies the device's purpose as a supplemental oxygen provider for patients requiring respiratory therapy.

Indications for Use and Clinical Benefit

Details when the device should be used to increase blood oxygen saturation and its benefits.

Contraindications

Lists conditions and situations where the device should not be used, emphasizing it's not life-sustaining.

Safety Instructions: Warnings

Provides critical warnings to prevent serious injury, death, or damage to the device.

Safety Instructions: Cautions

Outlines important cautions to prevent minor injury, discomfort, or device damage.

Instructions and Training

Instructions and Training Requirements

Emphasizes the necessity of user training and reading the manual before operation.

Pre-Operation Guidelines

General Instructions Before Use

Provides essential steps and checks, including inspecting the device and accessories, before initial use.

Rechargeable Battery Packs

Details the types of battery packs (standard and extended) and their typical durations at different settings.

Charging the Batteries

Provides instructions on how to charge the device's batteries using AC or DC power sources.

Using the Nasal Cannula

AC Power Supply Operation

Details the process of connecting and using the AC power supply for the concentrator.

DC Power Cord Operation

Provides instructions for connecting and safely using the DC power cord.

Operating the Concentrator

Preparing Your Concentrator for Use

Steps to ensure the concentrator is ready for operation, including placement and power connection.

Connecting to Power Source

Instructions for connecting the concentrator to AC power or installing a battery.

Using Your Concentrator

Step-by-step guide on how to use the device, including turning it on and breathing.

Setting Flow Rate

Instructions on how to adjust the oxygen flow setting as prescribed by a physician.

Using the Device for Breathing

Details on breathing technique and how the concentrator delivers oxygen based on breath detection.

Turning Off the Concentrator

Steps on how to properly power down the oxygen concentrator.

Storage, Alarms, and Travel

Responding to Alarms

Guidance on recognizing and reacting to different alarm conditions indicated by the device.

Traveling with Your Concentrator

Alarm and Icon Glossary

Alarm System Details

Explains the device's intelligent alarm system, priority levels, and potential consequences of non-response.

Medium Priority Alarms (Level 4)

Describes Level 4 medium priority alarms, such as no-breath detection and oxygen errors.

Troubleshooting and Maintenance

Troubleshooting Common Problems

Provides solutions for common issues indicated by display, lights, or audible signals.

Cleaning, Care, and Maintenance Overview

General guidelines for periodic inspection, care, and maintenance of the device.

Filter Cleaning & Replacement

Column Change Procedure

Battery Care, Service Life, and Connectivity

Battery Care and Maintenance

Pairing with the Connect App

Pairing with Mobile Application

Inogen Rove 6 Specifications

General

Oxygen Concentration	90% (+6% / -3%)
Flow Settings	1-6
Power Options	AC, DC, and battery
Battery Duration	Up to 6.5 hours
Noise Level	38 dBA

Related product manuals