©2022 Inogen, Inc. All rights reserved. Page 16 of 356 96-12100-01-01-A
6.5 DC POWER CORD (BA-306)
The system may or may not include a DC power cord. If it does not include a DC power cord, it can be purchased as
a separate accessory from the manufacturer.
WARNING!
Risk of death, injury or damage
Do not touch the tip of the DC power cord after use because it will be hot. Touching the tip of the DC power cord
immediately after removal from the cigarette lighter adaptor may cause injury.
The DC power cord consists of a single cable with one end that plugs directly into the device and another end that
goes into the DC outlet.
To use the DC power cord:
1. Plug one end of the DC power cord into the cigarette lighter
or auxiliary DC power supply.
2. Plug the other end of the DC power cord into the device.
3. Make sure device is secure before operating the car or other
vehicle. Power on your device and use normally.
To Next Page
Loading...
Need help?
General
