What to do if Inogen at home Medical Equipment provides no oxygen?
If your Inogen medical equipment isn't providing oxygen, first, ensure the concentrator is powered on by pressing the On/Off button. Next, check the cannula and its connection to make sure it's properly connected and not kinked or obstructed. Also, inspect the oxygen tubing or cannula for any faults and replace them if necessary.
What to do if Inogen at home Medical Equipment does not power on?
If your Inogen medical equipment doesn't power on when you press the On/Off button, check that the power cord is properly connected. If the issue persists, it may indicate a malfunction, and you should contact your equipment provider.
General| Warranty | 3 years |
|---|---|
| Weight | 18 pounds |
| Oxygen Flow | Up to 5 liters per minute |
| Noise Level | 40 dB (at 3 LPM) |
| Oxygen Concentration | 87% to 96% |
| Flow Settings | 1 to 5 LPM |
| Oxygen Output | Up to 5 LPM |
| Oxygen Purity | 87% to 96% |
| Power Specification | 120V AC, 60Hz, 2.5A |
| Operating Altitude | Up to 10, 000 feet |
Specific conditions where the device should not be used.
Critical safety information to prevent serious injury or death.
Precautions to prevent minor injury or equipment damage.
Explains visual indicators and their meanings on the device.
Details the function of buttons and settings for device operation.
Describes device alarms and indicator lights for status and warnings.
Instructions for cleaning the device exterior and accessories.
Procedure for cleaning the particle filter and replacing others.
To Next Page
