Inogen at home User Manual

13
Storage
When not in use, store indoors away from excessive moisture and
temperatures. Storage conditions outside of range specified may result in
damage and device malfunction.
Disposal of Equipment and Accessories
Follow your local governing ordinances for disposal and recycling of the
concentrator and accessories.
Dimensions: 16.5”H x 13”W x 7”D
Weight: 18 lbs
Warm-Up Time: Less than 5 minutes
Oxygen Concentration: 90 +6%/-3% at all settings
AC Power: 100-240VAC, 275 W Max, 50-60Hz
Environmental Ranges
for Use:
Temperature: 41 to 104°F (5 to 40˚C)
Humidity: 15 to 95%, non-condensing
Altitude: 0 to 10,000 ft (0 to 3048 m)
Environmental Ranges for
Shipping & Storage:
Temperature: -13 to 158°F (-25 to 70˚C)
Humidity: 0 to 93% non-condensing
Altitude: n/a
Maximum Outlet Pressure: 19.6-40.6 psia
(135-280 KPa Absolute)@ 20˚C
Flow Control Settings: 5 Settings: 1 to 5 liters per minute
9. Specifications, Inogen At Home, Model GS-100
Standards Compliance
This device is designed to conform to the following standards:
• EN ISO 8359:2012, Oxygen Concentrators for Medical Use – Safety
Requirements (ISO 8359:1996, Second edition, Amendment 1)
• ASTM F 1464:2005, Oxygen Concentrators for Domiciliary Use
• IEC 60601-1:Edition 3.1: 2012, Medical Electrical Equipment
-- Part 1: General requirements for basic safety and essential performance
Classification:
• IEC Class II Equipment
• Type BF Applied Part
• IP21 Enclosure Ingress Protection against solid objects of 12.5mm minimum
diameter and vertically falling drops of water
• Not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide
• Continuous Operation

Inogen at home Specifications

General

Warranty	3 years
Weight	18 pounds
Oxygen Flow	Up to 5 liters per minute
Noise Level	40 dB (at 3 LPM)
Oxygen Concentration	87% to 96%
Flow Settings	1 to 5 LPM
Oxygen Output	Up to 5 LPM
Oxygen Purity	87% to 96%
Power Specification	120V AC, 60Hz, 2.5A
Operating Altitude	Up to 10, 000 feet