TIRES AIR PRESSURE
Air pressure in tires: 40psi to 50psi.
SAFETY GEAR
Helmet: most serious injuries that occur while riding are head injuries. This
can be prevented if a helmet is worn.
You must wear a helmet while riding your LIGHT 2 . The helmet must be
worn according to its instructions.
MECHANICAL SAFETY TESTS:
Before using LIGHT 2 : Perform a visual inspection that all screws and nuts
are tight and in place. Note if anything looks amiss, or is showing signs of
wear. If you are unsure, bring your LIGHT 2 to the authorized distributor.
Tires and wheels: check the tires for signs of wear. To do this- spin them
to make sure that they are not yet in need of replacing. Make sure that
the wheels are freely rotating from the brakes. If not, take your INOKIM
to the authorized distributor.
Before each ride, always check your brakes and mechanical function.
SAFETY
As you accelerate, lean forwards.
As you brake, tilt your weight backwards!
TIP
WARNING !
Certain countries or regions require safety devices or gear. It is
your responsibility to know the state laws, and follow them.
To Next Page
Loading...
