EasyManua.ls Logo

INOKIM LIGHT 2 Super - Cruise Control Functionality

INOKIM LIGHT 2 Super
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
LIGHT 2
DISPLAY MODES
CRUISE CONTROL (third mode)
The default setting is Cruise Control off (letter "n" for No Cruise Control to
indicate).
Press or to choose enable Cruise Control
(Letter "Y" to indicate Yes Cruise Control).
Long touch to save setting.
Short touch to enter rst mode.
TRIP RESET
Reset TRIP by long press
OTHER DISPLAY MODES ARE:
TRIP- your trip distance since your last trip reset. Press to swap.
ODO - your scooters total distance since its factory assembly,
or a new / repaired battery was placed.
Battery voltage - Your battery state.
Error - your system has encountered an error, please contact your local
dealer to nd out what it is.
THROTTLE OPERATION
WARNING!
Please be aware that when using Cruise Control system, releasing
your thumb from the throttle will not slow you down, you may nd
yourself in danger or in danger of others.
CRUISE CONTROL
While riding at any same speed for more then ten (10) seconds, the Cruise
Control will be turned on, (If this option is dened in "SETTINGS", it does not
come as a default for safety reasons).
When Cruise Control is operated, you can release your thumb from the throttle
and the scooter will continue to ride at full speed.
To slow down, simply apply pressure on one of the brake levers or press the
throttle again, the Cruise Control will be turned off.
When riding with cruise control and braking, Cruise Control system powers off.

Related product manuals