-8-
Direction of Use
Correctly connect all parts as picture 1
2. LED Handset will display current height of the tv lift (82 cm).
3. Rise operation : press and hold ‘’UP’’ button, desk will rise, release to Stop.
4. Down operation : press and hold ‘’DOWN’’ button, desk will fall, release to Stop .
5.How to memorize a position :
a. Pressing and holding UP or DOWN button to a height
b. Press S button
c. Press button 1
d. The height will be remembered by button 1.
The same way, the button 2,3,4 can remember the other heights.
After memory, press 1/2/3/4 button, TV lift will motion to the height it remembered.
Press ‘’UP’’ or ‘’DOWN’’ button during the memory motion. The motion will be stopped.
Press the stop key of the remote controller for 5 sec, the column will move to the position set by
memory 1.
PICTURE 1