What to do if the Inovalley HP32-CD CD Player volume is at 0 or muted?
If the volume on your Inovalley CD Player is set to 0 or muted, increase the volume to a suitable level or press the MUTE button on the remote control again to restore the sound.
What to do if the Inovalley HP32-CD function light is on, but there is no sound?
If the function light is on but there's no sound, turn off the power and check the input jack to ensure that the correct signal is connected to the appropriate input jack.
Why does my Inovalley CD Player have no function light or sound?
If there is no function light and no sound, the plug might not be properly connected. Ensure the plug is fully inserted into the electrical outlet.
Details on the optical laser beam system and built-in safeguards.
Precautions against disassembly and hazardous laser light exposure.
Step-by-step guide to attach the bottom plate to the tower speaker.
Instructions for removing the cover and installing AAA batteries.
Precautions on battery type, mixing, replacement, storage, and disassembly.
How to choose between CD, USB, SD CARD, AUX IN, FM RADIO, and BLUETOOTH modes.
Instructions for CD, USB, SD CARD, FM RADIO, and BLUETOOTH playback.
Details on output power, frequency response, power, input, Bluetooth, FM, S/N, dimensions, weight, and accessories.
Solutions for no function light/sound and no sound with light ON.
Guidelines for battery usage, disposal, polarity, and recharging.
To Next Page
General