Need help?Do you have a question about the Inovance Easy501 and is the answer not in the manual?
General| Power Supply | 24V DC |
|---|---|
| CPU | 32-bit |
| Analog Inputs | 4 |
| Analog Outputs | 2 |
| Operating Voltage | 24V DC |
| Operating Temperature | -10°C to 55°C |
| Protection Class | IP20 |
| Output Type | Relay |
| Communication Ports | RS-485 |
Overview of the Easy501/Easy502 PLC series, its features, and the guide's content.
Lists certifications, directives, and standards the product complies with.
General safety precautions and responsibilities when using the product.
Defines DANGER, WARNING, and CAUTION levels for safety notices.
General safety advice for handling and operating the PLC.
Details of product models, series, and nameplate information.
Lists key general specifications like data capacity, speed, and programming languages.
Specifies environmental requirements like temperature, altitude, pollution degree, and immunity.
Recommends horizontal installation with clearance for cooling and wiring.
Diagram and table showing terminal assignments for inputs, outputs, and power.
Overview of network connectivity options with other Inovance devices and protocols.
Details on EtherCAT protocol, synchronization, baud rate, and number of slaves.
Specifies cable requirements, connectors, and pin assignments for EtherCAT.
Steps to start and stop the PLC after programming is complete.
Instructions for programming the PLC user programs using an SD card.
To Next Page