‑16‑
Item Easy501‑0808TN specifications Easy502‑0808TN specifications
Bit operation 0.144 μs/reference
Word
transmission
0.338 μs/reference
Float
operation
0.779 μs/reference
Ethernet ‑
EtherCAT
communica‑
tion
Supports 1 EtherCAT master with up to 72 EtherCAT slaves.
Number of
axes available
(pulse + bus)
8‑axis 16‑axis
Serial
communica‑
tion
Supports up to 3 channels (one channel in the main unit and two
channels extended in the extension card).
CAN
communica‑
tion
Supports 1 master through the extension card (firmware version 5.65.2.0
and later, software version AutoShop4.6.5.0 and later).
● CANlink: Supports up to 63 slaves.
● CANopen Supports up to 30 slaves.
High‑speed
input
Single‑phase: 8‑channel 200 k
High‑speed
output
5‑axis 200 k, PWM pulse width modulation supported
Extension
module
Supports up to 16 local extension modules.
Extension card Supports up to two extension cards.
Program
language
LD, SFC, FB/FC function (LD) supported
Type‑C Supports user program download/upload and firmware upgrade through
GE20–TF extension card.
IP rating IP20
To Next Page
Loading...
