5G INDOOR ROUTER FX2000 QUICK START GUIDE 4
Setting up your FX2000
Step one: install the SIM card
If you received the FX2000 from your service provider, the device manufacturer may have pre-
installed the SIM card. Please inspect the SIM slot on the back of the device to confirm.
• Use the included SIM tool to insert a Nano 4FF SIM card into the
appropriate SIM slot on the back of the device.
NOTE: If necessary, remove the SIM from its protective sleeve, being careful not to touch the
gold-colored contact points. Insert the SIM card notch first, with the contact points facing
down.
This device supports only Nano SIM cards.
To Next Page
Loading...
