43
NS-14T004 Insignia Flex™ Android Tablet
www.insigniaproducts.com
3 Touch + at the top right corner of the screen.
4 Use the on-screen keyboard to enter the network SSID, then touch the
security type you want to use. You can select:
• None—No security.
• WEP—Wired Equivalent Privacy. Note: A passphrase is required.
• WPA/WPA2 PSK—Wi-Fi Protected Access. Note: A password is
required.
• 802.1 x EAP—802.1x Extensible Authentication Protocol.
Note: If you are not sure which security type to select, refer to your
network setup documentation.
5 Touch Save.
The network you added appears in the list of available networks.
Checking network status
To check network status:
1 Touch the (home) icon, touch the (applications) icon, then
touch the (settings) icon. The Settings screen opens.
NS-14T004_13-0274_MAN_V1_ENG.fm Page 43 Sunday, July 14, 2013 7:56 AM
To Next Page
Loading...
