GB 20
Display Indicators
Note: For proper surround sound make sure you have followed the setup and installation procedure
fully.
Surround Sound & Sound Effects
- Stage - Hall
- Disco - Live
Selecting Surround Output Modes
The number of output modes varies according to the system setup and the input sources. Press SURROUND
repeatedly on the remote control to select the different surround modes as shown below:
- Dolby Pro Logic II Surround - 3 Stereo
- Stereo - Digital Soundfield Simulation - Stadium
Selecting EQ Modes
There are 6 EQ modes available while you are listening to 2 channel output (e.g. Music CD). Press TONE
repeatedly on remote control for selection amongst FLAT, ROCK, POP, CLASSIC, JAZZ, and EXTENDED BASS.
After selected each EQ modes, press OK, then use to adjust the system TREBLE and BASS level.
Press to adjust the level.
VIDEO
PL II
To Next Page
Loading...
