EasyManua.ls Logo

Insignia MC-ID175 - User Manual

Insignia MC-ID175
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Before using your new product, please read these instructions to prevent any damage.
User Manual
Product Name: Induction Cooker
Model: MC-ID175, NS-IC2ZBK7
Manufacture: UL-CCIC Company Limited
V1
FINAL
FOR PRINT

Questions and Answers

  • M
    Michael AllenAug 10, 2025
    What to do if my Insignia Cooktop does not heat?
    • P
      Peter RussellAug 10, 2025
      If your Insignia cooktop isn't heating, ensure you're using a compatible pan with a flat bottom that's centered and large enough for the cooking zone (at least 4.7 inches in diameter). Check that the cooktop is plugged into a working outlet and that you're using the correct cooking zone. Also, verify that the cooktop is not locked.
  • C
    cory49Aug 15, 2025
    Why does my Insignia Cooktop stop heating?
    • R
      Robert MilesAug 15, 2025
      Your Insignia cooktop may stop heating due to several reasons. Ensure that the air intake and vent are not blocked and that the controls are clean. Note that the cooktop automatically turns off if the pan is removed for more than 10 seconds, or the heating time may have finished, so reset the timer. If frying, the temperature of the cooking oil may be too hot and built-in safeguards may have turned it off; wait several minutes before attempting to turn your cooktop back on.
  • B
    Bradley SmithAug 25, 2025
    How to prevent scratches on my Insignia Cooktop?
    • M
      Michael RiveraAug 26, 2025
      To prevent scratches on your Insignia cooktop, avoid scraping utensils across the surface and refrain from using abrasive cleaners. Instead, use a ceramic glass cooktop cleaner to remove any marks.
  • R
    regina33Aug 30, 2025
    Why is the cooking zone on my Insignia Cooktop heating food too hot or not hot enough?
    • J
      Jonathan BullockAug 30, 2025
      If a cooking zone on your Insignia cooktop heats food unevenly, ensure you are using good quality pans (not lightweight or warped). Adjust the temperature level until the correct amount of heat is used.
  • J
    Jordan WeberSep 3, 2025
    What to do if the display of my Insignia Cooktop does not light up?
    • C
      Carol SaundersSep 3, 2025
      If the display on your Insignia cooktop does not light up, make sure that the power cord is plugged into a working outlet and that the power cord is not damaged.
  • J
    Jenna WilsonSep 10, 2025
    What to do if the display of Insignia Cooktop shows an error code?
    • R
      rogershannahSep 12, 2025
      If the display shows an error code due to an open or short circuit in the main or IGBT sensor, the sensor being too hot, voltage issues, dry burning, an invalid main sensor, or a malfunctioning fan, bring your cooktop to a repair technician to be fixed. If the cooktop is hot, wait for it to cool first.

Insignia MC-ID175 Specifications

General IconGeneral
BrandInsignia
ModelMC-ID175
TypeMulticooker
Capacity6 Quarts
Non-Stick PotYes
Delay TimerYes
Keep Warm FunctionYes
Power1000W
Cooking ProgramsSteam
MaterialStainless Steel