Your TV has four VESA mounting holes on
the back. If you attach a wall-mount bracket
to the back of your TV, the bracket must be
securely attached, using all four holes. If
you do not use all four mounting holes, your
TV may fall and cause property damage
or personal injury. See the documentation
that came with your wall mount for
complete mounting instructions.
Quick Setup Guide | NS-24D420NA16/NS-24D420MX16
24" 1080p • 60Hz LED TV
2
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?
FEATURES
1
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need:
Soft surface and Phillips screwdriver
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then click
Support & Service. Enter NS-24D420NA16
or NS-24D420MX16 in the box under
Manual, Firmware, Drivers & Product
Information, then click
►
. The
NS-24D420MX16 comes with a printed
manual.
STOP
Do not plug your power adapter in until all
other devices have been connected.
WALL MOUNT
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need:
Soft surface and Phillips screwdriver
!
A Carefully place your TV face-down on a
cushioned, clean surface.
Before using your new product, please read these
instructions to prevent any damage.
A
AUDIO/VIDEO OUT
AUDIO/VIDEO OUT
WHICH CABLES
DO YOU HAVE?
OR
OR
Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack.
However, certain devices must be connected to the ARC jack. See the instructions that came
with your device for more information.
Note: Connect the yellow
video cable to the
green VIDEO/Y jack.
HDMI (BEST)
Best video quality
COMPONENT
BETTER
AV (GOOD)
COAXIAL
GOOD
Note: The component and AV jacks are shared. This means you can connect only one component
or AV device at a time. We suggest upgrading to HDMI (BEST) if your device supports it.
AUDIO/VIDEO OUT
AUDIO/VIDEO OUT
B
A
B
CABLE
INCLUDED ACCESSORIES
Remote control and
two AAA batteries
TV stands
M4 screws (14 mm length) (2 pcs.)
Power adapter
AAA
+
AAA
+
Power indicator
Remote control sensor
A Carefully place your TV face-down on a cushioned, clean surface.
B See instructions that came with the wall-mount bracket for
information about which screws to use and how to correctly hang your TV.
Warning: This apparatus is intended to be supported by a UL Listed wall-mount bracket.
B Align the screw holes on the TV stands with the holes on the bottom of your TV, then secure
each stand with one of the provided M4 × 14 mm screws.
M4 x 14 mm screw
M4 x 14 mm screw
FAC TO RY
USE
ONLY
HDMI 1
( ARC )
HDMI 2
USB
AUDIO OUT
MENU
INPUT
VOL
VOL
CH
CH
AV IN
DC IN
(12 V)
COMPONENT IN
ANT / CABLE IN
DIGITAL
OUTPUT
(Coaxial)
L- AUDIO -R
VIDEO / Y
PB
P
R
HDMI 1
( ARC )
HDMI 2
AV IN
DC IN
(12 V)
COMPONENT IN
ANT / CABLE IN
DIGITAL
OUTPUT
(Coaxial)
L- AUDIO -R
VIDEO / Y
P
B
P
R
ANT / CABLE IN
NS-24D420NA16NS-NS-24D420MX16 _15-0620_QSG_V2_ENG_Final.ai 1 7/28/2015 9:20:53 AM
To Next Page
Need help?
General
