Insignia NS-24D510NA15 - Use an MHL-Enabled Device; Connect and Use; Switch Back to a Connected Device

43
NS-24D510NA15 Insignia 24" LED TV
www.insigniaproducts.com
Use an MHL-enabled device
You can connect your MHL-enabled device, such as
a cell phone, and view your device’s screen on your
TV.
Connect and use
1 Connect an MHL-enabled device to your TV. For
connection instructions, see “Connect an
MHL-enabled device” on page 23. A message
tells you the device is connected.
2 Press ENTER to access your MHL-enabled
device. Your device’s menu opens.
3 Use
S T W X and ENTER to navigate on your
device.
Switch back to a connected device
1 Press INPUT, then press S or T to select
HDMI 2 (MHL/ACC).
OR
Press MENU, then press
W or X to highlight
MHL/ACC.
2 Press ENTER to access your MHL-enabled
device. Your device’s menu opens.
Note
You must use the purple HDMI 2 (MHL)
jack to connect an MHL-enabled device.
Note
Your device’s menu will vary depending on
the device and the Apps you have loaded
on the device.
Note
The buttons you use to navigate on your
device may vary depending on the device.
Note
Your device’s menu will vary depending on
the device and the Apps you have loaded
on the device.