Insignia NS-42E570A11 - Upgrade TV Software via USB; Connect TV and USB Drive; Initiate Software Update

4. Downloadfirmware;ifapop‐upwindowopenstellingyoutoopen,saveorcancel,clickSave
andsavethefiletoyourUSBflashdrive.Note:Fileneedstobesavedontherootdirectory.
a. Note:Filesizeisapproximately3MB.Estimateddownloadtimeis1‐2minutes(witha
1.5Mbpsbroadbandconn ection).
5. AftersavingthefirmwaretoyourUSBflashdrive;removetheUSBflashdrivefromyour
computer.
Second:UpgradingtheTVSoftwarewithaUSBFlashDrive(Stick)
1. MakesureyouTV’sACcordissecurelypluggedintoawalloutletandtheunitisturnedoff.This
canbeverifiedbyaredindicatorlightonthefrontoftheTV.
2. InserttheUSBflashdrivecontaining thefirmwarethatwasdownloadedintotheTV’sUSB
serviceportlocatedonthesideoftheTV.Note:Thisportmaybecoveredbyarubberflap,you
mayneedtoflipopentherubberflap(Seephotobelow).

3. TurntheTVonusingtheremotecontrolorpowerbuttononthesideoftheTV.
4. Ascreensimilartotheonebelowwill appear(Note:ifthereisnoupgrademenudisplayed;you
canturnyourTVoff,thenturntheunitbackon):
