22
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
www.insigniaproducts.com
Storing your kegerator/beverage cooler
If you will be away from your kegerator/beverage cooler for more than
three weeks.
1 Turn off the kegerator/beverage cooler and unplug it from the wall
outlet.
2 Remove all kegs and beverages.
3 Clean and dry the interior of the kegerator/beverage cooler.
4 Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Moving your kegerator/beverage cooler
1 Turn off the kegerator/beverage cooler and unplug it from the wall
outlet.
2 Remove all kegs and beverages.
3 Securely tape down all loose items inside your kegerator/beverage
cooler.
4 Tape the door shut.
Be sure the kegerator/beverage cooler stays in the upright position
during transportation and protect the exterior with a blanket or similar
padding.
Converting your beer dispenser to a
beverage refrigerator
1 Follow the steps in "Replacing kegs" and "Replacing the CO2 tank."
2 Remove the draft arm assembly and pull the beer line thru the top of
the cabinet.
3 Replace the top cabinet plug.
4 Remove the guard rail and cover the guard rail installation holes with
the plugs provided.
5 Install the two wire shelves.
6 Adjust the temperature as desired.
Caution
Use extreme caution with children. The unit should not be
accessible to child's play.
NS-BK1TSS6_NS-BK2TSS6_15-0765_MAN_V3_ENG.fm Page 22 Tuesday, December 22, 2015 6:20 PM
To Next Page
Loading...