EasyManua.ls Logo

Insignia NS-BTST21 - Replacing the stylus

Insignia NS-BTST21
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Bluetooth Stereo Turntable
www.insigniaproducts.com
3 Toggle the Phono/Line switch to select the output mode.
Replacing the stylus (Part number: Audio-Technica ATN3600L)
The stylus should last about 300 hours under normal use. However, we
recommend that you replace the stylus as soon as you notice a change in sound
quality. Prolonged use of a worn-out stylus can damage records.
1 Turn the RPM selector switch to OFF to turn off the power.
2 Remove the stylus by pulling it downward and forward at the same time.
CONNECTED DEVICE SWITCH POSITION
Device with PHONO input PHONO
Device without PHONO
input
LINE
Note: The volume knob doesn't adjust the volume of the external speaker when
using the RCA cable.