PACKAGE CONTENTS
• Bluetooth Noise-Canceling Headphones • USB charging cable • Audio cable
• Two additional pairs of earbuds in small and large sizes • Quick Setup Guide
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter your model in the search box, then press ENTER. Next to Features, click Support & Downloads,
then next to User Guide, click the language you want.
FEATURES
• Noise cancelling
• Ambient noise monitoring
• Volume control
• Listen to music or talk on the phone wirelessly
• Music playback: 8 hours
• Echo cancellation and noise suppression
• Voice prompts and easy pairing
• High quality sound
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Bluetooth Noise-Canceling
Headphones
NS-CAHBTEBNC-S
BLUETOOTH AND NOISE CANCELLING BASIC INDICATION
ACTION
Power on
Power o
Pairing mode
Volume Up/Down
Incoming call
Answer call
Reject call
Redial
Reset device list
Noise cancelling on
Noise cancelling o
Monitor on
Monitor o
OPERATION
Press and hold more than two seconds
Press and hold more than three seconds
Press and hold more than four seconds in power o
mode
Press and release / button
Press and release when a call is incoming
Press and hold when a call is incoming
Double press
Long press more than ve seconds in power o
mode
Slide the noise cancelling switch to the noise cancelling
on position
Slide the noise cancelling switch to the noise cancelling
o position
Press and release to enter the monitor mode
Press and release to exit the monitor mode
LED INDICATION
Blue LED lights for 1.5 seconds
Red LED lights for 1.5 seconds
Blue and red LED blinking alternately
Blue LED blinks three times every ve seconds
when a call is received
Red LED ashes 10 times
Green LED light on
Green LED turn down
Green LED ashes one time per three seconds
Green LED light on
SOUND
“power on”
“power o”
Two short beeps
Two high beeps for
maximum volume
Ring tone
One long beep
Two long beeps
Two short beeps
CHARGING YOUR STEREO HEADPHONES
• When the red indicator LED blinks three times every minute and the voice prompt says “battery low”, the battery is low. To charge the battery,
plug the charging cable into your computer and into the microUSB port on your headphones. The red LED turns on to indicate that the battery is
charging and turns o when fully charged.
USING YOUR STEREO HEADPHONES
Turning your stereo headphones on and o
1 Place the headphones around your neck.
2 Press and hold more than two seconds. The LED blinks blue (when turned on) or red (when turned o) and the voice prompt says “Power
on” or “Power o”.
PAIRING YOUR STEREO HEADPHONES
Notes:
• Range is 33 feet (10 meters)
• Supports easy pairing
• Prompts you by saying “Your device is connected,” when connected
• Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
1 With your stereo headphones turned o, press and hold for four seconds. The blue and red LEDs blink alternately.
2 On your phone or MP3 player, select INSIGNIA NS-CAHBTEBNC-S from the list of discovered devices, then enter the password 0000
(four zeros) (if required) to pair your headphones.
For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device’s documentation.
Note: After the headphones have been successfully paired with the cell phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player.
# DESCRIPTION
1 Indicator LED
2 Micro USB port
3 Volume Up /
Next Track
4 (Power/Talk /
Play / Pause /
Pairing) button
5 Volume Down /
Previous Track
6 Retraction buttons
7 Earbuds
8 Microphone
9 Indicator LED
10 Noise cancelling
11 Monitor button
12 Monitor microphone
FUNCTION
Shows current Bluetooth status of the headphones.
Plug the micro USB connector into this port to charge your
headphones.
Press to increase the volume.
Press and hold for one second to skip to the next track.
Press to turn on your stereo headphones.
If you receive a phone call, press to talk.
Press to pair your headphones with a Bluetooth enabled device.
Press to decrease the volume.
Press and hold for one second to skip to the previous track.
Press to retract the cord.
Allow the headphones to t comfortably in your ear.
Allows you to talk on the telephone.
Shows current noise cancelling status of the headphones.
Cancel low frequency noise.
Press to start ambient noise monitoring.
Pick up the ambient low frequency noise.
To Next Page
Need help?
General
