To Next PageTo Next PageInsignia NS-DA1902 CD Player remote control doesn’t work, what to do?
If the remote control for your Insignia CD Player isn’t working, first, remove any obstacles between the remote and the player. Try using the remote closer to the player, pointing it at the remote sensor window. If it still doesn’t work, replace the battery with a new one.
What to do if my Insignia NS-DA1902 CD Player has no sound?
If your Insignia CD Player produces no sound, make sure the RCA cable is securely connected. Also, verify that you've selected the correct input on your system. Ensure the system isn't paused by pressing the PLAY button. If fast forward or fast reverse is active, press the PLAY button to return to normal. Check the volume settings and adjust the speaker volume. If the player is too hot, turn it off for 30 minutes to cool down.
Why is my Insignia CD Player not playing the disc?
If your Insignia CD Player disc does not play, insert the disc correctly with the playback side facing down (label side up) on the disc tray. Clean the disc. Also, check if the player is in pause mode. If condensation has formed inside the player due to a sudden temperature change, wait about an hour for it to clear and try again.
Why does my Insignia NS-DA1902 have severe hum or noise?
If you're experiencing severe hum or noise with your Insignia CD Player, ensure the connecting cords are not too close to a transformer or motor, and are at least 10 feet (3 meters) away from a TV set or fluorescent light. Clean the plugs and jacks with a cloth slightly moistened with alcohol. Clean the disc. Also, consider that vibrations from the speakers may be affecting the CD player.
How to fix CD door if it will not open on Insignia CD Player?
If the CD door of your Insignia CD Player will not open, reset the player by pressing the (Standby/on) button to turn it off, waiting a few seconds, and then pressing the (Standby/on) button again to turn it back on.
General| Brand | Insignia |
|---|---|
| Model | NS-DA1902 |
| Category | CD Player |
| Programmable Memory | 20 tracks |
| Frequency Response | 20 Hz - 20 kHz |
| Disc Formats Supported | CD, CD-R, CD-RW |
| Playable File Formats | MP3 |
| Audio Output | Stereo |
| Outputs | RCA audio output |
| Power Supply | AC adapter |
| Weight | 2.2 lbs |
| Power Source | AC |
| Output Power | 2 x 1.5W |
Read and follow all safety and operating instructions, heed warnings, and use the product safely.
Follow precautions for ventilation, placement, and handling to prevent damage or injury.
Instructions for connecting the CD player to an amplifier using RCA cables.
Step-by-step guide to loading discs and starting playback.
How to pause, stop playback, search tracks, and locate specific points on a disc.
Troubleshooting guide for issues like no power, no sound, hum, remote control problems, or disc playback errors.
