7
20-, 35-, or 50-Pint Dehumidifier
www.insigniaproducts.com
Control panel
# FEATURE FUNCTION
1Filter Reset The filter light flashes after 250 hours of operation, indicating that the
air filter needs to be cleaned. To reset the light after cleaning the filter,
press the FILTER button.
2Full Turns on when the water tank is full. Turn off the unit and empty the
water tank.
3 (Auto) Defrost Turns on when the dehumidifier is in auto defrost mode. The fan
continues to run in this mode.
4Comfort Press to set the dehumidifier to the comfort setting (humidity level
cannot be specified). The indicator LED turns on.
Press again to turn off the comfort setting. The indicator LED turns off.
5
Cont.
(Continuous
dehumidifying)
Press to turn on continuous dehumidifying. The indicator LED turns
on.
Press again to turn off continuous dehumidifying. The indicator LED
turns off.
6Turbo Press to set the fan speed to high. The indicator LED turns on.
Press again to set the fan speed to normal. The indicator LED turns off.
7Timer Press to initiate the Auto Start and Auto Stop programs. See Auto
Start and Auto Stop timers on page 9.
8 LED Display Normally displays the actual room relative humidity level (from 30%
to 90%).
When setting the desired humidity level, displays the setting level
from 35% to 85%.
When setting the auto start/stop time, displays the time (0~24 hours).
9 Humidity % +/-
buttons
Use to set the desired humidity level from 35% to 85% (in 5%
increments).
When auto start/stop mode is initiated, press to set the time until
auto start is initiated, then press to set the duration until auto stop
turns the unit off.
10 Power Press to turn the power on or off.
Notes:
• Touch the control panel lightly when pressing the keys.
• To avoid scratching the control panel, do not touch it with sharp objects.
To Next Page
Loading...
Need help?
General
