Insignia NS-DSC1110A User Manual

15
10 Megapixel Camera
www.insigniaproducts.com
Turning the stabilizer function on or off
The stabilizer function helps prevent blurred
photos. This function is only available for capturing
photos.
If the stabilizer function is turned on, the stabilizer
icon appears on the LCD, and the ISO setting is
automatically set to Auto.
To turn the stabilizer feature on or off:
1 Press MODE to switch to Photo mode.
2 Press MENU to open the Record menu.
3 Press / or /
to highlight Stabilizer, then
press OK/DISP to open the submenu.
4 Press / or /
to select On or Off, then
press OK/DISP.
When the stabilizer function is turned on, an
icon will appear on the left side of the LCD.
5 Press MENU again to close the menu.
Turning the focus light on or off
The focus light is only available for recording still
photos. When the focus light is turned on and the
lighting is dim, the camera emits amber light until
the focus is locked.
To turn the focus light on or off:
1 Press MODE to switch to Photo mode.
2 Press MENU to open the Record menu.
3 Press / or /
to highlight Focus Light,
then press OK/DISP to open the submenu.
4 Press / or /
to select On or Off, then
press OK/DISP.
5 Press MENU again to close the menu.
Stabilizer
icon
Note
The focus light setting can only be adjusted when
Simple mode is set to Off.

Insignia NS-DSC1110A Specifications

General

Brand	Insignia
Model	NS-DSC1110A
Category	Digital Camera
Language	English