Insignia NS-DSC1110A - Turning Help Text on or off; Resetting Settings to the Factory Defaults

22
NS-DSC1110A 10 Megapixel Camera
www.insigniaproducts.com
5 Press / or / to highlight the battery type
you are using, then press OK/DISP.
6 Press MENU to close the menu.
Turning help text on or off
Turn on the help text function to display the help
information for a highlighted menu option.
To turn help text on or off:
1 Turn on your camera, then press MODE to
switch to Photo or Video mode.
2 Press MENU. The on-screen menu opens.
3 Press / or / to select the (tools) tab.
The Tools menu opens.
4 Press / or /
to highlight Help Text, then
press / or OK/DISP to open the submenu.
5 Press / or /
to highlight On or Off, then
press OK/DISP.
6 Press MENU to close the menu.
Resetting settings to the factory defaults
The factory reset function resets your camera to its
factory default settings without deleting any
captured photos or videos.
To reset settings to the factory defaults:
1 Turn on your camera, then press MODE to
switch to Photo or Video mode.
2 Press MENU. The on-screen menu opens.
3 Press / or / to select the (tools) tab.
The Tools menu opens.
4 Press / or /
to highlight Factory Reset.
5 Press / or OK/DISP. A confirmation message
appears.
6 Press / or /
to highlight Ye s , then press
OK/DISP.
7 Press MENU to close the menu.
Note
The help text function can only be accessed when
Simple mode is set to Off.
Note
The factory reset function can only be accessed when
Simple mode is set to Off.