15
Insignia 12 Megapixel Camera
www.insigniaproducts.com
4 Press / or / to select the setting you
want, then press OK/DISP. You can select:
Photo mode (Simple mode on)
Photo mode (Simple mode off)
Video mode
5 Press MENU again to close the menu.
Setting ISO
The ISO function lets you adjust the ISO sensitivity
for recording still images, based on the light levels
of your surroundings.
• Use a higher ISO setting in dim conditions and a
lower ISO setting in brighter conditions.
• As you move through the selections, the preview
on the LCD monitor changes accordingly.
To set ISO:
1 Slide the MODE switch to switch to Photo
mode.
2 Press MENU to open the Record menu.
3 Press / or /
to highlight ISO, then press
OK/DISP to open the submenu.
4 Press / or /
to select the setting you
want, then press OK/DISP. You can select:
• Simple mode off—Auto, 1600, 800, 400, 200,
100, or 50
• Simple mode on—Auto, High, Medium, or
Low
5 Press MENU again to close the menu.
Setting the color balance
The color balance function controls the white
balance in capturing still images or videos.
As you move through the selections, you can see
the preview on the LCD accordingly.
To set the color balance:
1 Slide the MODE switch to switch to Photo or
Video mode.
2 Press MENU to open the Record menu.
Icon Setting Image size
High 4000 x 3000 (12 megapixels)
Medium 2592 x 1944 (5 megapixels)
Low 2048 x 1536 (3 megapixels)
Icon Setting Image size
12M
12M 4000 x 3000 (12 megapixels)
8M
8M 3264 x 2448 (8 megapixels)
5M
5M 2592 x 1944 (5 megapixels)
3M
3M 2048 x 1536 (3 megapixels)
16:9
Wide 4000 x 2250
Icon Setting Image size
Wide 16:9 (720 x 400)
VGA VGA (640 x 480)
QVGA QVGA (320 x 240)
10M
5M
3M
12M
Note
• If the stabilizer function is turned on, ISO is
automatically set to Auto and cannot be
adjusted. To adjust ISO, turn off the stabilizer
function first.
• The higher the ISO setting, the grainier the
photo will be. This is normal.
Note
Color balance can only be adjusted when Simple
mode is set to Off.
12M
To Next Page
Loading...
Need help?
General
