Setting up your camcorder
To install the battery:
• Slide the battery cover o your camcorder and insert
the battery, making sure that the + and – symbols on
the battery line up with the + and – symbols on your
camcorder, then replace the battery cover.
To charge the battery:
• Make sure that your camcorder is turned o , then connect the AC charger to your camcorder’s
mini USB port and to a power outlet.
- OR -
• Connect the USB cable to the mini USB jack on your camcorder and to a USB jack on a
computer.
NOTE: You can use your camcorder while the AC charger is plugged in, but the battery will not charge unless the camcorder
is turned o . You cannot use your camcorder while it is connected to your computer.
Using the LCD
4
1 Picture resolution: 2592 × 1944 (5 mp)
2
With memory card: number of pictures
remaining at current resolution with card’s
unused memory
No memory card: number of pictures
remaining at current resolution with
camcorder’s unused internal memory
3 Motion detection (Simple Mode o only)
4 Self-timer
5 Scene (Simple Mode o only)
6 Macro mode
7 LED light/Digital light
8
Movie recording time remaining at current
resolution
9 Video format
10 Stabilization
11 Zoom meter
12 Date and time
13 Battery indicator
14 Color balance (Simple Mode o only)
1
2
3
4
5
6
8
11
12
13
14
9
7
10
NOTE: See your User Guide on CD for more information about
using your LCD
To Next Page
Loading...
