Insignia NS-DV720PBL2 - Setting up Your Camcorder; Using the LCD

Setting up your camcorder
To install the battery:
• Slide the battery cover o your camcorder and insert the
battery, making sure that the + and – symbols on the
battery line up with the + and – symbols on your camcorder,
then replace the battery cover.
To charge the battery:
• Make sure that your camcorder is turned o , then connect
the AC charger to your camcorder’s mini USB port and to a power outlet.
- OR -
• Connect the USB cable to the mini USB jack on your camcorder and to a USB jack on a
computer.
NOTE: You can use your camcorder while the AC charger is plugged in, but the battery will not charge unless the
camcorder is turned o . You cannot use your camcorder while it is connected to your computer.
Using the LCD
Inse
r
Your ca
m
memory
NOTE: Wh
e
card inste
a
To ins
e
• Inser
t
and t
To re
m
1 Push i
n
2 Pull th
Getti
NOTE: Re
m
To tur
n
Press do
w
- OR -
Open th
e
Rotate t
h
movies.
To tur
n
Press do
w
- OR -
Close th
e
Initial
When y
o
Simple
M
Turni
n
When y
o
and set t
h
4
1 Picture resolution: 2592 × 1944 (5 mp)
2
With memory card: number of pictures
remaining at current resolution with card’s
unused memory
No memory card: number of pictures
remaining at current resolution with
camcorder’s unused internal memory
3 Motion detection (Simple Mode o only)
4 Self-timer
5 Scene (Simple Mode o only)
6 Macro mode
7 LED light/Digital light
8
Movie recording time remaining at current
resolution
9 Video format
10 Stabilization
11 Zoom meter
12 Date and time
13 Battery indicator
14 Color balance (Simple Mode o only)
NOTE: See your User Guide on CD for more information about
using your LCD
NS-DV720PBL2_10-0624_QSG_V1_EN.indd 4NS-DV720PBL2_10-0624_QSG_V1_EN.indd 4 7/13/2010 10:03:48 AM7/13/2010 10:03:48 AM