Insignia NS-HF2007 - Page 13

www.insigniaproducts.com
13
NS-HF2007
STEP 6:
You need:
• Align the magnetic door latch (GG) with the holes on the upper shelf (E), then secure the latch with two 3 × 15 mm
screws (FF) using a Phillips screwdriver. Make sure that you attach the latch to the side of the shelf that has cross bars.
FF 3 × 15 mm screw (2)
GG Magnetic
door latch (1)
E Upper shelf (1)
Phillips screwdriver
FF
FF
GG