Insignia NS-HF2007 - Page 34

www.insigniaproducts.com
34
58" TV Gaming Stand
STEP 27:
You need:
1 Insert six 3 × 16 mm screw (II) along the outer edges of the lower back (M), then tighten the screws with a Phillips
screwdriver.
2 Align two cable wraps (TT) with the holes in the middle of the lower back, then secure each wrap with a 3 × 16 mm
screw (II) using a Phillips screwdriver.
TT Cable wrap (2)
II 3 × 16 mm screw (6)
Phillips screwdriver
TT
II