Insignia NS-HF2007 - Page 47

www.insigniaproducts.com
47
NS-HF2007
STEP 40:
You need:
1 Insert three 3 × 12 mm screws (AA) into the holes on the DL and DR parts of the rail assembly (BB).
2 Align the screws in the DL and DR parts of the rail assembly with the holes on the outside of the left and right drawer
sides.
3 Tighten the screws with a Phillips screwdriver.
CR
DR
DL
CL
AA 3 × 12 mm screw (6)
BB Left and right rail assembly (2)
Phillips screwdriver
AA
AA
DL
DR