Insignia NS-HFTVS3N175 - Attach the Right Side Frame to the Top Panel

www.insigniaproducts.com
13
3-in-1 TV Stand
STEP 6: Attach the right side frame to the top panel
You need:
1 Place flat washers (R), then lock washers (Q) over the two drilled holes on the inside of the top rail of right side
frame (E).
2 Insert 1" bolts (N) through the washers and into the two threaded holes on the top panel (A). Tighten the bolts with the
4 mm hex key (W).
W Hex key 4 mm (1)
Q Lock washer (2)
R Flat washer (2)
N 1" bolt (2)