www.insigniaproducts.com
12
STEP 5: Align and attach the right side frame to the shelves
You need:
1 Place flat washers (R), then lock washers (Q) over the four drilled holes on the inside of the lower shelves (B and C).
2 Insert 1 1/4" bolts (O) through the washers and into the four threaded holes on the right side frame (E). Tighten the
bolts with the 4 mm hex key (W).
Note: Make sure that the mounting holes on the top rail of the right side frame (E) overlap the threaded holes
underneath the top shelf frame (A) correctly.
W Hex key 4 mm (1)
Q Lock washer (4)
R Flat washer (4)
O 1 1/4" bolt (4)
E Right side frame (1)
To Next Page
Loading...
