Insignia NS-HFTVS3N175 - Attach the Bottom Shelf to the Spine

www.insigniaproducts.com
11
3-in-1 TV Stand
STEP 4: Attach the bottom shelf to the spine
You need:
1 Place flat washers (R), then lock washers (Q) over the two drilled holes on the bottom shelf (C).
2 Insert 1 1/4" bolts (O) through the washers and into the two threaded holes on the outer edge of the spine (F). Tighten
the bolts with the 4 mm hex key (W).
Note: The metal frame faces the floor when you turn your stand upright.
C Bottom shelf (1)
W Hex key 4 mm (1)
Q Lock washer (2)
R Flat washer (2)
O 1 1/4" bolt (2)
Metal frame