Insignia NS-HTVMF0C User Manual

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in.
3
www.insigniaproducts.com
Tools needed
You will need the following tools to assemble your new TV wall mount:
ardware
Package contents
Make sure that you have all the hardware necessary to assemble your new TV wall mount:
10 Wall Plate (1) 1 TV Brackets (2) R Wall Plate Template (1)
Edge-to-edge
stud finder
Level
Phillips screwdriver
Socket wrench with 1/2 in.
(13 mm) socket or adjustable
wrench
Measuring tape
Drill
7/32 in. (5.5 mm) wood drill
bit (for wood stud wall)
OR
3/8 in. (10 mm) masonry
drill bit (for solid concrete
or concrete block walls)
Hammer
Tape
Pencil
Awl
Wall mount template

10 (1)
1 (2)
R

Insignia NS-HTVMF0C Specifications

General

Brand	Insignia
Model	NS-HTVMF0C
Category	Racks & Stands
Language	English