What to do if my Insignia Cooktop does not heat?
If your Insignia cooktop isn't heating, ensure you're using a compatible pan with a flat bottom that's centered and large enough for the cooking zone (at least 4.7 inches in diameter). Check that the cooktop is plugged into a working outlet and that you're using the correct cooking zone. Also, verify that the cooktop is not locked.
Why does my Insignia Cooktop stop heating?
Your Insignia cooktop may stop heating due to several reasons. Ensure that the air intake and vent are not blocked and that the controls are clean. Note that the cooktop automatically turns off if the pan is removed for more than 10 seconds, or the heating time may have finished, so reset the timer. If frying, the temperature of the cooking oil may be too hot and built-in safeguards may have turned it off; wait several minutes before attempting to turn your cooktop back on.
What to do if the display of Insignia NS-IC2ZBK7 shows an error code?
If the display shows an error code due to an open or short circuit in the main or IGBT sensor, the sensor being too hot, voltage issues, dry burning, an invalid main sensor, or a malfunctioning fan, bring your cooktop to a repair technician to be fixed. If the cooktop is hot, wait for it to cool first.
How to prevent scratches on my Insignia NS-IC2ZBK7 Cooktop?
To prevent scratches on your Insignia cooktop, avoid scraping utensils across the surface and refrain from using abrasive cleaners. Instead, use a ceramic glass cooktop cleaner to remove any marks.
Why is the cooking zone on my Insignia NS-IC2ZBK7 Cooktop heating food too hot or not hot enough?
If a cooking zone on your Insignia cooktop heats food unevenly, ensure you are using good quality pans (not lightweight or warped). Adjust the temperature level until the correct amount of heat is used.
What to do if the display of my Insignia Cooktop does not light up?
If the display on your Insignia cooktop does not light up, make sure that the power cord is plugged into a working outlet and that the power cord is not damaged.
General| Brand | Insignia |
|---|---|
| Model | NS-IC2ZBK7 |
| Type | Induction Cooktop |
| Number of Burners | 2 |
| Power | 1800 W |
| Control Type | Touch |
| Voltage | 120V |
| Power Levels | 10 |
| Color | Black |
| Safety Features | Auto Shut-Off, Overheat Protection |
| Dimensions | 15.75 x 11.81 x 2.36 inches |
To Next Page
