Insignia NS-IC2ZBK7 - Using Your Cooktop: Operation Modes; Powering On and Pan Detection; Temperature Mode Selection; Wattage Mode Selection

2. Plug the power cord into a power outlet.
Note
Do not use an extension cord to connect your cooktop. If the power cord
is too short, have a qualified electrician or serviceman install an outlet
near the appliance.
3. Place a pan on the cooktop.
4. Press ON/OFF to turn on your cooktop. The cooktop beeps once.
Note
If there is no operation within 10 seconds, the cooktop turns off
automatically. If there isn’t a compatible pan on the cooktop, the display
shows “U” for 10 seconds to indicate a pan is required.
5.
Press
TEMP to enter temperature mode, then press or to select the
temperature you want:
Level 1 2 3 4 5 6 7 8 9 10 11
Temperature
150°F
(66°C)
180°F
(82°C)
210°F
(99°C)
240°F
(116°C)
270°F
(132°C)
300°F
(149°C)
330°F
(166°C)
360°F
(182°C)
390°F
(199°C)
420°F
(216°C)
450°F
(232°C)
OR
Press HEAT to enter heating mode, then press or to select the
wattage you want.
Level 1 2 3 4 5 6 7 8 9 10
Wattage
300W 500W 750W 800W 850W 900W 950W 1100W 1300W 1440W
www.insigniaproducts.com
15