12
NS-MC60SS9
www.insigniaproducts.com
3 Put the pressure release valve into the vent on the lid.
4 Put a finger over the floating valve to keep it in position, then turn the lid
upside down.
5 On the bottom side of the lid, attach the silicon cap on the floating valve with
the other hand, then release the floating valve.
6 Put the valve protector on the inner side of the pressure release valve.
Seal
ing
Pressure release valve
Floating valve
Silicon cap
Pressure release valve
protector
NS-MC60SS9_18-0383_MAN_V1_ENG.fm Page 12 Monday, July 23, 2018 4:44 PM