13
6 Qt. Multi-Function Pressure Cooker
www.insigniaproducts.com
7 Install the gasket on the gasket retainer into the lid. Make sure that the gasket
is correctly installed all around the retainer.
8 Slide the condensation collector in place on the back of your cooker.
Positioning your cooker
• Make sure that your cooker has at least six inches of open space on all sides.
• When using your cooker, make sure that you provide at least 12" (30 cm) of
headroom above your cooker to protect surfaces from damage due to hot
steam.
• Make sure that the air vents at the bottom of your cooker are free from
obstruction.
Gasket
Gasket retainer
Condensation collector
NS-MC60SS9_18-0383_MAN_V1_ENG.fm Page 13 Monday, July 23, 2018 4:44 PM