USB outlet
5V / 2.0A (total power)
USB outlet
5V / 2.4A (specied)
Base
USING YOUR CHARGING STATION
1 Plug the AC adapter into the charging station’s power jack and a wall outlet.
2 Connect your devices’ USB charging cables into your charging station‘s USB
ports. Make sure that your devices’ input specications match the USB ports
that you connect them to.
Note: See “Features” for information on the USB ports‘ power output.
3 Wrap your cables loosely around the cable organizers (if needed), then thread
them through the openings in the front of your charging station.
4 Place the cover on the base so that the wire holes on the base and cover are
aligned. Your cables should exit the base through the holes. Insert the dividers
into the slots, as needed.
5 Connect your devices to their appropriate power cords, then set them in the
appropriate slots. You can charge four devices at a time.
Note: Check your devices’ input specication to determine which USB port to connect it
to. See “Features” for information on the USB ports‘ power output.
PACKAGE CONTENTS
• 4-Port Charging Station
• AC adapter
• Quick Setup Guide
FEATURES
• Designed for tablet, phone, MP3, and eReader charging
• Convenient removable cover with integrated stands
• Locations for cable management
Quick Setup Guide
|
NS-MD4U6N
4-Port Charging Station
Before using your new product, please read these instructions to prevent any damage.
AC wall
outlet
Divider
Cover
AC adapter
DC
jack
Openings
To Next Page
Need help?
General
