Insignia NS-RMT3D18 User Manual

7 With your original remote, press the
button with the function you want
to teach. The LED blinks twice.
Note: If the LED displays a long blink,
the function wasn’t learned. Start from
step 5 to try again.
8 Repeat steps 5-7 for each button
you want to learn.
9 After you have added all the functions,
press and hold SETUP on your new
remote until its LED blinks twice.
Deleting a learned function
1 Press and hold SETUP until your
remote’s LED blinks twice.
2 Press
TELEVISION or
CABLE / SATELLITE /
STREAMING, or
BLURAY/
DVD for the device you want to
delete a function from.
3 Press 9, 7, 6.
4 Press the button with the learned
function twice. The LED blinks
twice and the button resets to its
original function.
USING YOUR REMOTE
1 Press TELEVISION or
CABLE / SATELLITE /
STREAMING, or
BLURAY/
DVD for the device you want to
control.
2 Press the buttons applicable to
that type of device.
Watch TV mode
Note: To control a soundbar or other
audio device with your remote, see
Adding an audio device.
While watching TV in
CABLE /
SATELLITE / STREAMING mode,
you can:
• Use your remote’s volume and
input buttons to control the TV. The
rest of the buttons will control the
device you’ve added to CABLE /
SATELLITE / STREAMING mode.
• Press
(power) once to turn your
set-top box on or o .
OR
• Press and hold (power) for two
seconds to turn both your set-top
box and your TV on or o .

Insignia NS-RMT3D18 Specifications

General

Brand	Insignia
Model	NS-RMT3D18
Category	Universal Remote
Language	English