Insignia NS-WBRDVD2 - Firmware Update Manual

Firmwareupdate:Download/InstallinstructionsforConnectedBlu‐rayDVD
players

Systemrequirements:acomputerwithanopenUSBport,USBflashdrive(stick),broadbandinternet
accessandoperatingsoftwareofWindowsXP,WindowsVistaorMacOS10.3ornewer.Thisoptionis
notrecommendedwithdial‐uporDSLservicewithabitratelowerthan256kbps.Iftheinstructions
providedbelowdonothelp,callInsigniaCustomerS upportat(877)467‐4289forassistance.
First:Downloadtheupdatefile
1. InsertUSBflashdriveintotheopenUSBportonyourcomputer.
2. Downloadfirmware;ifapop‐upwindowopenstellingyoutoopen,saveorcancel,clickSave
andsavethefiletoyourUSBflashdrive.
 Note:Filesizeisapproximately47MB.Estimateddownloadtimeis4‐5minutes(witha1.5
 Mbpsbroadbandconnection).
3.AftersavingthefirmwaretoyourUSBflashdrive;removetheUSBflashdrivefromyour
computer.
Second:UpgradingthePlayerSoftwarewithaUSBFlashDrive(Stick)
1. Ejectanydisksthatmaybeintheplayer,andremoveanyUSBflashdrivealreadyinsertedinthe
player.
2. Turntheplayeroff;inserttheUSBflashdrivecontainingthefirmw a rethatwasdownloadedinto
theplayer’sUSBport.
3. Turntheplayeron
4. Afteroneortwominutes,ascreensimilar(Versionand/ormodelwillbedifferent)totheone
belowwillappear:

