Insinger 45SA5 User Manual

UNDERCOUNTER SCULLERY MACHINE
ELECTRIC or STEAM HEAT
45SA5-F1 (steam)
45SA5-F2 (electric with 9 KW booster)
45SA5-F2D (electric with 18 KW booster)
45SA5-F2NM (electric, non-magnetic, 11.4 kw booster)
STANDARD FEATURES
• Detergent and rinse additive
connection provisions
• Plastic 16" x 16" racks
• Bulk-head mounted NEMA 12
control panel
• Simplified scrap screen design
• Door safety switch
• Standard frame TEFC motor
• 2 tech manuals
• Authorized tech rep in each port
• Exact footprint replacement
• Complies with ASTM
specifications
• Heat:
Electric— 1.5 KW electric
immersion heater and 9 or 18
KW electric booster with low
temp cut-off.
Steam— 1 stainless steel steam
coil and steam booster with low
temp cut-off
• Capillary thermometers for wash
and rinse
• Automatic tank fill
• S/S frame
• Pressure reduction valve and
line strainer
• Manual tank fill
• Low water protection
• Stainless steel level gauges
DESIGN
The Insinger 45SA5 washes 45 racks per hour. It pumps 70 gal/min. of
wash water through stationary wash arms. The rinse cycle consists of
stationary lower rinse arm with 6 nozzles and an upper rinse arm with 4
final rinse nozzles.
The tank, hood and door are all 16 gauge stainless steel.
OPTIONAL ACCESSORY EQUIPMENT
• Non-magnetic pump & booster
Live Tech Service is Available
24 hours/day 7 days/week
800-344-4802
service@insingermachine.com
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
www.insingermachine.com

Insinger 45SA5 Specifications

General

Brand	Insinger
Model	45SA5
Category	Dishwasher
Language	English

Summary

Undercounter Scullery Machine: Design and Features

DESIGN

Details on rack capacity, water flow, rinse cycle, and construction materials.

STANDARD FEATURES

Key capabilities including heating, operational controls, and construction details.

Heat Systems

Electric immersion heater or steam coil with booster options for heating.

Operational Components

Features like automatic/manual tank fill, thermometers, and low water protection.

Construction and Controls

Includes S/S frame, NEMA 12 panel, scrap screen, and safety switch.

Compliance and Support

Mentions ASTM compliance, authorized tech reps, and manuals.

OPTIONAL ACCESSORY EQUIPMENT

Lists available optional add-on equipment for the machine.

Non-magnetic pump & booster

An optional accessory that provides a non-magnetic pump and booster.

Scullery Machine Specifications

Capacity and Flow Rates

Details on racks per hour, tank capacity, wash pump, steam consumption, and rinse flow.

Weight and Electrical Requirements

Information on shipping/operating weight and current draw for different models.

45SA5-F1 Current Draw

Electrical current consumption for the 45SA5-F1 model.

45SA5-F2 Current Draw

Electrical current consumption for the 45SA5-F2 model.

45SA5-F2D Current Draw

Electrical current consumption for the 45SA5-F2D model.

45SA5-F2NM Current Draw

Electrical current consumption for the 45SA5-F2NM model.