InSinkErator Steamin' Hot H-770

To Next Page

The Installation, Care and Use of Your New

Steamin' Hot

Models H-770 and H-778

Hot Water Dispenser

Safety Instructions

Warnings alert you to hazards or unsafe practices which could result in severe

personal injury or death.

Cautions alert you to hazards or unsafe practices which could result in minor personal injury

or product/property damage.

Please be certain that the person who installs or uses this appliance carefully reads and understands the Safety Instructions

contained in this manual. This appliance produces extremely hot water. Do not allow children to operate this appliance.

How your hot water

dispenser works

Water is electrically heated to a brewing/cooking hot 190°F

(88° C)* by a compact tank that mounts under the sink. A

thermostat maintains it at this approximate temperature.

When you turn the tap, cold water enters the bottom of the

tank and forces hot water out of the faucet. The system is

vented so the tank is not pressurized.

*APPROXIMATE

Important

Do not install this appliance in public areas where there

is unsupervised access to this appliance.

Main Page

Need help?

Do you have a question about the InSinkErator Steamin' Hot H-770 and is the answer not in the manual?

Summary

Safety and Operation Overview

Safety Instructions and Warnings

Alerts to hazards and unsafe practices that could result in injury, death, or property damage.

How the Hot Water Dispenser Works

Details the heating process, thermostat function, and water dispensing mechanism.

Pre-Installation Planning

Electrical Requirements

Important Usage and Safety Notes

Covers personal injury, fire hazards, and steps for extended absence or winterizing.

Installation - Water Connections

Connecting to Water Supply

Instructions for connecting the dispenser to the cold water supply line using appropriate valves.

Connecting Head to Tank Lines

Testing Water Connections

Installation - Tank Mounting & Plumbing

Mounting the Water Tank

Final Plumbing Connections

Final Setup and Initial Use

Filling the Tank and Power Connection

Crucial steps to fill the tank with water before plugging in the unit to prevent damage.

Initial Heating and Operation

Product Specifications and Dimensions

Technical Specifications

Details on capacity, electrical requirements, thermostat range, and insulation standards.

Maintenance and Troubleshooting

Adjusting Water Temperature

Troubleshooting Common Issues