insize ISR-C300 - Advanced Settings and Parameters; RPC Details Settings; Date and Time Configuration; LCD Display Brightness Adjustment

13
14
7.Rpc Details settings
According to user's demand, Rpc-parameter's calculation can be
selected from "μm" and "%".
8.Date and Time settings
If you want to change the date and time, please press STOP first,
after the modification is finished, press START.
9.LCD Display brightness settings
10.Reset factory settings
11.Format memory
Data formatting is the deletion of data records. Once formatted, all
data will be emptied. Before the data formatting, the instrument has
the confirmation prompt information. After the user confirms, the
data will not be restored. Please proceed with caution.
Format memory takes about 1 minutes, please do not turn off
the power.
10
Measuring Condition Settings
Cut off length λc
0.25mm;0.80mm;2.50mm
Number of Sampling lengths
(×n)
1-5
Range
±20μm; ±40μm; ±80μm; ±160μm
Unit
Inchmm
Filter
RC;PC-RC;GUASS;D -P