Need help?Do you have a question about the insize IST-DCT Series and is the answer not in the manual?
General| Resolution | 0.1μm/0.01mil |
|---|---|
| Accuracy | ±(3% reading+1μm); ±(3% reading+0.04mil) |
| Display | LCD |
| Operating Temperature | 0°C to +40°C |
| Weight | Approx. 100g |
Details the physical layout, components, and measurements of the torque tester.
Explains the various elements and readings displayed on the instrument's LCD screen.
Instructions for securely mounting the cap torque tester on a workbench.
Guidance on selecting the appropriate clamping hole based on bottle size for effective testing.
Details the purpose and operation of each function key on the device.
Instructions on how to turn the device on and off using the power key.
Steps for conducting measurements after test preparation, including unit and mode selection.
How to zero the gauge for tare removal and store measured results.
How to select measurement units and code test samples into groups.
Explains Track, Peak, Preset, First Peak, and Double Peak measurement modes.
Guide to browsing, deleting, and printing data stored in the device's memory.
Options for display mode, diagram scale, and key settings.
Provides conversion factors between various torque measurement units.
Instructions for charging the device when the battery is low.
To Next Page
